Advertisement
DOMED FRUIT CAGE ASSEMBLY INSTRUCTIONS
Introduction
Thank you very much for purchasing this Harrod Horticultural Decorative Domed
Fruit Cage.
Safety
To install your cage safely we recommend that you enlist the help of three or more
people. Take extra care when working on step ladders on soft ground.
Tools
1 x soft rubber mallet, 1 x 8mm spanner, 2 x 13mm spanners, 1 x 17mm spanner, 1 x 5m
tape measure, 1 x pair of scissors, 1 x ball of string, 1 x spirit level, 1 x hole former (ARC-
021)
(Optional)
Part Identification
Before constructing the fruit cage remove all protective packaging and check that all
parts listed in the pack contents list (CHK811) are present. Use the part identification
diagram on the opposite page to help you recognise the parts. You will have varying
quantities of cage parts depending on the number of units combined to make up your
specific arrangement. Each door kit, of which you will have at least one, comprises of
the parts list in the table below left.
HEAVY-DUTY STEEL DOOR
KIT IDENTIFICATION (GDN105)
Part Description
REF NO
1:
2 x 0.7m Horizontal Support
2:
1 x Diagonal Support
3:
2 x 1.9m Vertical Supports
4:
1 x 2.3m Door Support Upright
HEAVY-DUTY STEEL DOOR
ASSEMBLY PACK (GDN116)
Part Description
REF NO
5:
4 x Two-Way Connector
6:
1 x T-Joint
7:
1 x Catch and Fixings
8:
2 x Hinge and Fixings
9:
2 x Hex Bolts M8 x 45mm
10:
4 x Plastic Washers M8
11:
2 x Nylock Nuts M8
12:
1 x Foot Plate and Clamp
Note: A 3mm allen key is provided
with GDN-809 for assembly of GDN-809
and GDN-808
REF No
PART No.
PGG117
4 :
PGG007
12:
PGG006
13:
PGG112
14:
15:
16:
17:
18:
PART No.
19:
GDN-676
20:
PGG005
GDN-809
21:
GDN-808
22:
GPP510
23:
GPP710
24:
GPP500
25:
GDN-108
26:
27:
NA
NA
NA
NA
PAGE 2
DOMED FRUIT CAGE
PARTS IDENTIFICATION
(GFC-130 & GFC132)
PART DESCRIPTION
2.3m Support Upright
4 x Foot Plate And Clamp
2.5m Horizontal Support
Three-Way Connector
Four Way Connector
Five Way Connector
Dome Fruit Cage Finial (option 1) PGG055
Top Corner Plate
2 Way Connector plate
4 Way Connector plate
Hex Bolt M10 x 20mm
M10 Washer
Dome Curved Roof Support
Ground Peg
Net Clip
Net Tie
Cast Decorative Finial (Option 2) PGG022
2m Wide Standard Sid Netting
Fitted Roof Net
Whipping Twine
Whipping Needle
PART No
PGG112
GDN-108
PGG035
GDN-675
GDN-679
GDN-678
PGG046
PGG012
PGG013
BOL342
BOL712
PGG041
GPP001
GPP005
GAR914
GAR070
GDN-087
TWN-294
TWN-295
Advertisement
