Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to LP81A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature : 25 ± 5°C(77 ± 9°F), CST : 40 ± 5°C
(2) Humidity : 65% ± 10%
(3) Power : Standard input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 20 minutes prior
to the adjustment.
4. General Specification(LCD Module)
Item
Display Screen Device
Aspect Ratio
LCD Module
Operating Environment
Storage Environment
Input Voltage
Power Consumption
LCD Module
(Maker : AUO, CMO,
CPT, LGD, SHARP)
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
32" wide Color Display Module
16:9
32" TFT WUXGA LCD
1) Temp. : 0 ~ 40 deg
2) Humidity : 0 ~ 85%
1) Temp. : -20 ~ 60 deg
2) Humidity : 0 ~ 85 %
100-240V~, 50/60Hz
Power on (Blue) : LG30/LG50
Power on (White) : LG60
≤ 170W
32" FHD
St-By (Red)
≤ 1.0 W (All)
Maker
LGD(FHD)
Outline Dimension
Pixel Pitch
Back Light
Display Colors
Coating
3. Test method
(1) Performance : LGE TV test method followed
(2) Demanded other specification
Safety
EMC
Measurement
Result
Inch
(H) x (V) x (D)
unit
32"
760 x 450 x 48
mm
32"
0.36375 x 0.36375
mm
32"
-
3H, AG/ 2H, AG
- 6 -
: CE, IEC Specification
: CE, IEC
Remark
Resolution:1366X768
32" FHD MAKER : LGD
LGE SPEC
Volume: 1/8 volume of sound distortion point
LG60:St-by Light condition
Remark
[with inverter]
LPL, CMO, AUO / Sharp
LGE Internal Use Only
Advertisement
