Page 2
IMPORTANT PLEASE READ All products manufactured and supplied by AQUAECO are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 3
Installation Instruction For Bidet Spray Valve W/Holder Before Installation: a) Be sure to thoroughly flush the water supply pipe and the impurities in the pipe. b) Use hydrostatic pressure not exceeding 1 Mpa (10bar). c) Please do not use steam for heating water, the temperature of water supply is less than 80'C.
Page 4
AQUAECO WASHROOM AND PLUMBING SOLUTIONS www.sanipexgroup.com INP-OUT-R665-XX-03-23...