Page 2
IMPORTANT PLEASE READ Remove all packaging and check the product for missing parts or damage before starting installation. Any alterations made to this product and fittings may infringe water regulations and invalidate the guarantee. The Installation must comply with all Local/National Water Supply Authority Regulations/Byelaws and Building and Plumbing Regulations.
Page 3
PRODUCT INSTALLTION DIAGRAM 1) CUP BODY GASKET 2) NUT 3) TEE 4) V-TUBE 5) OUTLET PIPE 6) WATER HEAD 7) OVERFLOW PIPE 8) OVERFLOW HEAD 9) SQUARE PAD 10) SCREW 11) SEALING WATER COVER WATER 12) BASKET STEEL CUP 13) GASKET NOTE: After checking each accessory before 14) GASKET installing the product, install it step by step...
Page 4
AQUAECO WASHROOM AND PLUMBING SOLUTIONS www.sanipexgroup.com INP-ORI-406-XX-11-21...