Philips 65PFG6659 User Manual page 57

Contrast settings
Contrast modes
With Contrast modes, you can set the level at which power
consumption is reduced when dimming the intensity of the
screen. Choose the mode for the best power consumption or
best picture intensity.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast >
Contrast modes.
3 - Press  (right) and select Best picture, Best power,
Standard or Off.
4 - Press , repeatedly if necessary, to close the menu.
Brightness
With Brightness, set the level of brightness of the picture. The
Brightness setting is intended for expert users. We recommend
that other users adjust brightness with the Contrast setting.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Brightness.
3 - Press  (right) and adjust the value with  (up)
or  (down).
4 - Press , repeatedly if necessary, to close the menu.
Video contrast
With Video contrast, you can decrease the range of the video
contrast. If you are watching 3D pictures, this setting is switched
to 3D video contrast. Video contrast and 3D video contrast are
settings intended for expert users.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Video contrast.
3 - Press  (right) and adjust the value with  (up) or 
(down).
4 - Press , repeatedly if necessary, to close the menu.
Light sensor
The Light sensor adjusts the picture and Ambilight settings
automatically to the lighting conditions of the room. You can
turn Light sensor on or off.
To turn on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Light sensor.
3 - Press  (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
• Only for TVs with the light sensor function.
Gamma
With Gamma, you can set a non-linear setting for picture
luminance and contrast. Gamma is a setting intended for expert
users.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Contrast
> Gamma.
3 - Press  (right) and adjust the value with  (up)
or  (down).
4 - Press , repeatedly if necessary, to close the menu.
Sharpness settings
Super resolution
Super resolution provides superior sharpness in line edges and
contours.
To turn on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Sharpness >
Super resolution.
3 - Press  (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the menu.
Noise reduction
With Noise reduction, you can filter out and reduce the level of
image noise.
To adjust the noise reduction . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Sharpness
> Noise reduction.
3 - Press  (right) and select Maximum, Medium, Minimum or
Off.
4 - Press , repeatedly if necessary, to close the menu.
MPEG artifact reduction
With MPEG artefact reduction, you can smooth the digital
transitions in the picture. MPEG artifacts are mostly visible as
small blocks or jagged edges in images.
To reduce the MPEG artifacts . . .
1 - Press  and select Setup and press OK.
57