Disassembly And Reassemble; Disassembly - Samsung QN Q65FNF Series Service Manual

3. Disassembly and Reassemble

This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully.
- Use the Samsung Open Jig and Cushion to remove the Rear Cover.
•
CAUTION
- Recommended Torque for Cabinet/Stand screws : 10 ~ 12kgf
•

3-1. Disassembly

Description & Screws
1
Carefully position the TV so that the screen is
facing downwards.
• Make sure to place the TV upon a soft
cushion or any material that will prevent
damage to the screen.
2
Pull out the right and left side ASSY STAND
P-BRACKET BOTTOM.
Open Jig Tool, Protection Cushion (curved models Only)
A strength of Torque can be changed depending on the situation.
3. Disassembly and Reassemble
Picture Description
3-1