Week Timer Menu - Quincy QHD750 Instruction Book

Instruction book

3.15 Week timer menu

Control panel
Text on figure
(1)
(2)
(3)
Menu icon, Week timer
Function

To program time-based start/stop commands for the dryer

To program time-based change-over commands for the net pressure band

Four different week schemes can be programmed.

A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week in the
cycle, one of the four programmed week schemes can be chosen.
Procedure
Starting from the Main screen (see

Move the cursor to the action button Menu and press the Enter key. Use the Scroll buttons to select
the Timer icon.
9829 2151 14
Scroll keys
Enter key
Escape key
In the Airlogic® you can select different timers on one day (up to 8 actions). It is
not possible to program two actions at the same time. Keep at least 1 minute
difference in between two actions.
Example: Start Dryer: 5.00 AM, Pressure setpoint 2: 5.01 AM (or later).
Main screen),
61