Description Of Operation - Hifonics ZEUS ZXR1200/5 User Manual

ENGLISH

DESCRIPTION OF OPERATION

7
FL
2CH
7
LINE INPUT
7
Connect the LINE INPUTS with the head unit by using the included RCA wiring harness or the HIGH
LEVEL INPUT harness.
INPUT LEVEL
8
If you use the RCA wiring harness with the pre-amplifier outputs of your head unit, this button must be
in position LOW. If you use the HIGH LEVEL INPUT wiring harness with the speaker outputs of your
head unit, this button must be in position HIGH.
9 INPUT FROM
These push buttons determine the input mode of the amplifier.
The following combinations of push buttons are possible:
2-channel input
FL / FR
2CH 2CH
4CH SUB
LEVEL
10
These controllers determine the input sensitivity (adaptation to the output signal of the head unit) for
each channel pair.
FRONT X-OVER MODE
11
This switch selects the desired operating mode of channel pair FRONT:
FULL: Full Range mode - the entire frequency range is amplified
HP: High Pass mode adjustable with HIGH PASS - frequency is limited downwards
DUPE: All settings made on REAR are then also effective on FRONT
HIGH PASS
12
This controller limits the frequency at the respective channel pair downwards. Low frequencies that
can damage a loudspeaker are cut off. The crossover frequency is adjustable at FRONT from 50 Hz
to 5000 Hz (5 kHz) and at REAR from 10 Hz to 500 Hz.
24
8 9 10 11 12
FR RL RR
INPUT INPUT
LEVEL
LEVEL FROM
4CH
HIGH 2CH
MIN MAX
LOW 4CH
LINE INPUT
INPUT
FROM
L R
AUTO TURN-ON
2CH
SUB DC VOX OFF
SUB
9 15
REM
GND +12V
IN/OUT
POWER INPUT
4-channel input
FL / FR / RL / RR
2CH 2CH
4CH SUB
10 13
FRONT
X-OVER MODE X-OVER MODE X-OVER MODE
HIGH PASS LEVEL
FULL HP DUPE FULL HP LP/BP
SUBWOOFER
50 Hz 5 kHz MIN MAX
LEVEL SUB SONIC LOW PASS BASS BOOST
MIN MAX 10 Hz 40 Hz 40 Hz 150 Hz 0 dB
10 16 14 17 18 19
BRIDGED
FL
POWER
PROTECT
ZXR 1200/ 5
RL
6-channel input
FL / FR / RL / RR / L SUB / R SUB
2CH 2CH
4CH SUB
12 14
REAR
HIGH PASS LOW PASS
BP
10 Hz 500 Hz 50 Hz 5 kHz
PHASE SHIFT
BLC
REMOTE
18 dB 0° 180°
FR
SPEAKER
OUTPUT
RR