Exploring Your Campervan; Base; Chassis; Wheels - Bavaria VANS 2019 User Manual

2. EXPLORING YOUR CAMPERVAN

2.1 Base

2.1.1 Chassis

Your dealer should give you the user manual and the chassis maintenance book published by the car manufacturer when your
campervan is delivered. We recommend that you take note of the contents and follow the instructions relating to chassis. The wheel
alignment is set by the chassis manufacturer before leaving the factory.
Wheel alignment must be checked at 1,500km (900 miles). An additional inspection is also strongly recommended at
20,000km (12,000 miles). Such inspections are at your expense.
The chassis number stamp is located on the front right wheel-housing.

2.1.2 Wheels

See chapter 3 for the tyre pressure. If you get a flat tyre, the spare tyre is located under the vehicle. The Fiat
user manual will have the best procedure for changing your tyre.

2.1.3 Accessories

Motorbike racks and coupling systems must be approved and fitted with the appropriate electrical circuit.
Accessories reduce the load capacity of the campervan and affect how the vehicle handles. Drivers should adapt their
driving or even reduce speed in some countries.
63