Troubleshooting; Customer Service - Bosch BGS41 Series User Manual

en Troubleshooting
Cleaning the exhaust filter
34 46
→ Fig. -

Troubleshooting

▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when re-
pairing the appliance.
▶ If the power cord of this appliance is
damaged, it must be replaced by the
manufacturer, the manufacturer's Cus-
tomer Service or a similarly qualified per-
son in order to prevent any risk.
The appliance is adjusted to the lowest
power level.
The Sensor Control indicator flashes red.
Filter in the dust container is soiled.
Switch off the appliance.
1.
Clean the filter in the dust container.
2.
The appliance is adjusted to the lowest
power level.
The Sensor Control indicator lights up red.
Dust container is full
Check the fill level of the dust container.
1.
Empty the dust container as needed.
2.
Fluff filter is soiled.
▶
Clean the fluff filter.
Brush on the turbo nozzle does not turn.
Brush roller is soiled.
▶
Clean the brush roller.
Suction power is too low.
▶
Turn the power controller to maximum
suction power.
Disposing of old appliance
Unplug the appliance from the mains.
1.
Cut through the power cord.
2.
Dispose of the appliance in an environ-
3.
mentally friendly manner.
Information about current disposal meth-
ods are available from your specialist
dealer or local authority.
18
This appliance is labelled in
accordance with European
Directive 2012/19/EU con-
cerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines
the framework for the return
and recycling of used appli-
ances as applicable
throughout the EU.

Customer Service

Detailed information on the warranty period
and terms of warranty in your country is
available from our after-sales service, your
retailer or on our website.
The contact details for Customer Service
can be found in the enclosed Customer
Service directory or on our website.