Connecting the Pharos Traveler GPS 535v with PC/Notebook
4
►
Switch your PC or notebook on.
►
Connect the ActiveSync cable (1) to the ActiveSync port on the Pharos Traveler GPS 535v.
►
Connect the ActiveSync cable to a USB port (2) of your PC/notebook.
The Pharos Traveler GPS 535v is now connected to your PC/notebook. The ActiveSync partnership
between your Pharos Traveler GPS 535v and your PC/notebook will be established.
Synchronizing data with new PC/notebook
If you intend to synchronize data with a new PC/Notebook, then you must first install ActiveSync on
the new PC/notebook and then create a new ActiveSync partnership (on this point, see the
corresponding explanations in the section "Initial start-up").
3
2
36
1