Related Manuals for Perfomance Tool M710K
Summary of Contents for Perfomance Tool M710K
- Page 1 H.V.L.P. Spray Gun Rebuild Kit Stock Number M710K OWNER'S MANUAL FOR YOUR SAFETY, please read these instructions carefully and retain them for future use.
- Page 2 The below numbers correspond with the part numbers in the owners manual of your REPLACEMENT PARTS LIST spray gun. Description Qty. Spring 22 23 Needle Valve Bushing Nylon Ring Air Valve O-Ring Washer Needle Valve Spring Washer Air Valve Stem Bushing Air Volume Control Stem E-Clip Spray Regulator Nut...
- Page 3 IMPORTANT SAFETY INFORMATION PARTS REPLACEMENT INSTRUCTIONS NOTE: Some parts may be sealed very tightly. It is recommended that you CAUTION: Before performing any maintenance on gun, read all secure the body of the paint gun wrapped in a cloth to a table vise to avoid warnings in product manual and disconnect tool from all hoses.
- Page 4 PARTS REPLACEMENT INSTRUCTIONS PARTS REPLACEMENT INSTRUCTIONS Paint regulator assembly: Paint Cup Bushing (15) and Paint Cup Filter (36): 1. Open the Spray Pattern Control Knob (23) all the way, until it stops. 1. Remove the Paint Cup (37) and discard the used Paint Cup Filter (36). Then remove the Screw (24) and remove both pieces (23) and (24).