Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for YEEFERM DCMS180
- Page 1 DCMS180 5 IN 1 MULTI FUNCTION SANDER Original Instructions...
-
Page 2: Explanation Of Symbols
1.Explanation of Symbols The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric shock. The symbol with the exclamation mark in the triangle is used to indicate important information in these operating instructions. -
Page 3: General Power Tool Safety Warnings
2.GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool”... - Page 4 be controlled with the switch is dangerous and must be repaired. Such preventive safety measures reduce the risk of starting the power tool accidentally. Power tools are dangerous in the hands of untrained users. Many accidents are caused by poorly maintained power tools.
-
Page 5: Batteries And Chargers
• Charge the battery packs only in YEEFERM chargers. • DO NOT splash or immerse in water or other liquids. • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104 °F (40 °C) (such as outside sheds or metal buildings in summer). - Page 6 Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. •DO NOT attempt to charge the battery pack with any chargers other than a YEEFERM charger. YEEFERM charger and battery pack are specifically designed to work together.
-
Page 7: Intended Use
CAUTION: Burn hazard. To reduce the risk of injury, charge only YEEFERM rechargeable battery packs. Other types of batteries may overheat and burst resulting in personal injury and property damage. -
Page 8: Operating Elements
3.Operating Elements... - Page 9 1. Switch 2. Battery pack 3. Vibrating plate 4. Speed control 5. Battery indicator 6. Dust bag inlet valve 7. Dust bag 8. 1 / 3 sander 9. Round sander 10. Delta Sander 11. Finger type Sander 12. Curved surface Sander 4.Operation a) Insert/Remove Battery Pack To insert a battery pack (sold separately), align the tab on the battery with the slot in...
- Page 10 Remove any dirt or debris from the pad surface before attaching the sanding disc. · Line the edge and holes of the sanding disc with the pad surface. Press the disc against the pad surface, checking to make sure the full surface is securely attached.
-
Page 11: Troubleshooting
5.Trouble Shooting Problem Cause Suggestion Sanding discs (10) Debris is reducing the effectiveness Keep discs clean. See section “11.Care and do not adhere to pad of the hook and loop fastening. Cleaning". surface(1). Empty the dust bag (9) and check for any blockages. - Page 12 Customer Care: service@tengya.com Nanjing Toua Hardware& Tools Co.,Ltd 129#Linqi Road,Dongshan International enterprise headquarters park, Jiangning,Nanjing, Jiangsu China www.touatools.com Made In China...