Advertisement
3. GETTING STARTED
Step1:
Assembly the Body Frame (1) as
shown, and put the Part (4) into the
second gear to facilitate the rear
assembly. Fix 4 Outer Hex Bolts (19),
8 Washers (26) and 4 Nylon Nuts
(30) to fix the Part (2) and Part (3) in
Body Frame (1) as shown. Then
tighten Bolt (19).
Note:
1. The long side of tube plug of Part
(2), Part (3) should be on the
ground.
2. That the support of Part (4) shall
not be a rubber cushion.
Step 2:
Assembly 4 Outer Hex Bolts (21), 8
Washers (27) and 4 Outer Hex
Bolts (20), fix the Part (10) and (11)
as shown position of the Body
Frame and tighten the Bolts (21)
and (20).
Note:
The long side of the Seat Cushion
(10) should be inside, and the long
side of the Backrest Cushion (11)
should be down.
- 7 -
Advertisement
