Sierra Wireless AirPrime HL7802 Hardware Integration Manual page 13

5. A label must be affixed to the outside of the end product into which the
6. A user manual with the end product must clearly indicate the operating requirements
The end product with an embedded AirPrime HL7802 module may also need to pass the
FCC Part 15 unintentional emission testing requirements and be properly authorized per
FCC Part 15.
Note: If this module is intended for use in a portable device, you are responsible for separate
approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102.
Rev. 1 June 2020
· ·The radiated power of a collocated transmitter must not exceed the EIRP limit
stipulated in Table 5-2.
Table 5-2: Collocated Radio Transmitter Specifications
Device
Collocated
a
transmitters
a. Valid collocated transmitter combinations: WLAN+BT; WiGig+BT.
(WLAN+WiGig+BT is not permitted.)
AirPrime HL7802 module is incorporated, with a statement similar to the following:
· This device contains FCC ID: N7NHL7802 / IC:2417C-HL7802.
and conditions that must be observed to ensure compliance with current FCC/IC RF
exposure guidelines.
Regulatory Compliance and Industry Certifications
Technology Frequency (MHz)
WLAN 2.4 GHz 2400–2500
WLAN 5 GHz 5150–5850
BT 2400–2500
WiGig 58320–62640
13
EIRP Limit (dBm)
30
30
16
25
41113745