Table of Contents
Advertisement
5: Regulatory Compliance and Industry Certifi-
cations
5.1 Important Compliance Information for
North American Users
The AirPrime HL7802 module has been granted modular approval for mobile applications.
Integrators may use the AirPrime HL7802 module in their end products without additional
FCC/IC (Industry Canada) certification if they meet the following conditions. Otherwise,
additional FCC/IC approvals must be obtained.
1. The end product must use the RF trace design approved with the AirPrime HL7802
module. The Gerber file of the trace design can be obtained from Sierra Wireless
upon request.
2. At least 20 cm separation distance between the antenna and the user's body must be
maintained at all times.
3. To comply with FCC/IC regulations limiting both maximum RF output power and
human exposure to RF radiation, the maximum antenna gain including cable loss in a
mobile-only exposure condition must not exceed the limits stipulated in
Table 5-1: AirPrime HL7802 Antenna Gain Specifications
Device
AirPrime HL7802
4. The AirPrime HL7802 module may transmit simultaneously with other collocated radio
transmitters within a host device, provided the following conditions are met:
· Each collocated radio transmitter has been certified by FCC/IC for mobile appli-
· At least 20 cm separation distance between the antennas of the collocated trans-
Rev. 1 June 2020
Technology
Band
B2
B4
B5
B12
LTE
B13
B25
B26
B66
GPRS G850
GPRS/EDGE
GPRS G1900
cation.
mitters and the user's body must be maintained at all times.
12
Maximum antenna gain (dBi)
Frequency (MHz)
Standalone
1850–1910
1710–1755
824–849
699–716
777–787
1850–1915
814–849
1710–1780
824–849
1850–1910
Table
5-1.
Collocated
8
6
6
6
6
4
6
3
6
3
6
6
6
4
6
6
3
1
3
3
41113745
5
Advertisement
Table of Contents
