Complete The Finished Wall - Kohler RiverBath K-1360 Installation Manual

Whirlpool
Drop-in Installation
Whirlpool
Flush Installation

10. Complete the Finished Wall

Drop-in, Flush, and Tile-in Installation
- If you have not already done so, carefully remove the protective tape from the whirlpool rim.
- Cover the framing with water resistant wall material. Seal the joints between the whirlpool rim edge and the
water resistant wall material with silicone sealant.
- Tape and mud the water resistant wall material. Install the finished wall to the water resistant wall material. Seal
the joints between the whirlpool rim and the finished wall material with silicone sealant.
- Install the faucet trim according to the instructions packed with the trim.
Continued
Kohler Co.
Apply silicone sealant to
the water-resistant wall
material and the
finished wall
Install the
finished wall
material
First install
water-resistant
wall material
Apply silicone sealant to
the water-resistant wall
material and the
finished wall
Install the
finished wall
material
First install
water-resistant
wall material
Whirlpool
9
Framing
First install
water-resistant
wall material
Install the
finished wall
material
Apply silicone sealant
to the water-resistant
wall material and the
finished wall
Tile-in Installation
1012489-2-
A