Table of Contents
Advertisement
Other connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external device
and the TV with the HDMI cable.
HDMI
• Supported HDMI Audio format:
(Depending upon model)
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz
/ 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
• If the device connected to Input Port also
supports HDMI Deep Color, your picture
may be clearer. However, if the device
doesn't support it, it may not work properly.
In that case, change the TV's [HDMI Deep
Color] setting to off. (Depending upon
model)
•
[General] [Devices] [HDMI
Settings] [HDMI Deep Color] (Depending
upon model)
USB
• Some USB Hubs may not work. If a USB device
connected through a USB Hub is not detected,
connect it directly to the USB port on the TV.
• It is recommended that you use a USB hub or USB
HDD with a power supply. (If the power supplied is
not sufficient, the USB storage device may not be
detected properly.)
• It is recommended that you use an external USB
HDD with a rated voltage of 5 V of less and a rated
current of 500 mA or less.
12
Pillow Speaker
Connect the pillow speaker (see example below)
to the PILLOW SPEAKER interface on the rear jack
panel of the TV.
Typical Pillow Speaker
(Serial Data Control)
Pillow Speaker Interface Pinout
Advertisement
Table of Contents
