Table of Contents
Advertisement
Available languages
Available languages
the indicators
flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting.
–
activated.
–
deactivated.
3. Press
4. Press the on/off button to confirm
the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
,
and
start to
.
and
go off.
continues to
= rinse aid dispenser
= rinse aid dispenser
to change the setting.
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
3. Press
to change the setting.
4. Press the on/off button to confirm
the setting.
This option deactivates the release of
salt. The salt indicator does not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press
.
The related indicator comes on.
The display shows the updated
programme duration.
7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
ENGLISH
11
and
until
,
and
start to
and
go off.
continues to
Advertisement
Chapters
Table of Contents
