3.1
Friction Rail Kit Installation Guide
Your friction rail kit package contains:
•
One pair of rack rails
•
One pair of fixing latches
•
4 latch screws, 4 rail screws and 4 rail washers
Latch screws
Front end
3.1.1
Setting up the friction rail kit on the rack
1.
Select a 1U space on the rack
where you want to install the rack
rail. A 1U space consists of three
square mounting holes with two
thin lips on the top and the bottom,
as shown in the right figure.
2.
Adjust the rack rail to fit the depth
of the rack.
3.
From inside the rack, place the rear
rail hook on the bottom thin lip of the
rear mounting hole, and then place the
front rail hook on the bottom thin lip of
the front mounting hole, as shown in
the right figure.
3-2
Fixing latches
Rail Washers
Rail screws
Rack rails
Rear end
Chapter 3: Installation options