Auxiliary Functions - Beko DFN26421WAD User Manual

Operating the product

Auxiliary functions

Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soil,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
C
Auxiliary functions may cause
changes in the programme
duration.
C
Auxiliary functions are not
suitable for all washing
programmes. Indicator of the
auxiliary function that is not
compatible with the programme
will not be active.
To add auxiliary function to the
programme:
1. Select the desired washing programme
by pressing the programme selection
key.
2. In the selected washing programme,
if auxiliary function is selected, its
symbol will be displayed on the screen.
If the function button is pressed again
the symbol will disappear and selection
is cancelled.
3. Selection will be cancelled when you
press the function key again.
Fast+ Function
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
TrayWash Function
Select Intensive 70°C programme and press
function key to run this function.
Dishwasher / User's Manual
Half Load function
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as you
like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half Load
indicator will become on in the function
selection indicator and on the display.
4. Start the programme by pressing Start
/ Pause / Cancel key.
C
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
Automatic Liquid/Gel Detergent
Dosage Function
(depends on the model)
Selection indicator illuminates and is
activated when you press the Automatic
Liquid/Gel Detergent Dosage function key.
If the function key is pressed again,
selection indicator turns off and the
function is deactivated.
It sets the liquid/gel detergent amount
automatically as per the washing cycle you
have selected and your settings.
The Automatic Liquid/Gel Detergent
Dosage function is activated
automatically when the washing
machine is turned on and detergent is
added for the first time.
If the selection indicator is flashing
when you select the function, you
shall add liquid/gel detergent to the
detergent compartment.
Automatic Liquid/Gel Detergent Dosage
Function changes the cycle durations.
35 / 48 EN