Detergent - Beko DFN26421WAD User Manual

PreparatIon
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in
water, stir it with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately,
run your machine empty in the
shortest program.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
16 /48 EN

Detergent

You can use powder, tablet and liquid/gel
detergent in the machine.
A
Only use the detergents
produced particularly for
use with dishwashers in the
machine. We recommend you
not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
Thanks to this system, the amount of rinse
aid and liquid/gel detergent required for the
selected washing programme is adjusted
automatically.
C
Please read the information
given in section "Operating
the Product" to activate or
deactivate the Automatic
Liquid/Gel Detergent Dosing
adjustment.
C
When the Automatic Liquid/
Gel Detergent function is
enabled, the Automatic Liquid/
Gel Detergent indicator on
the panel will light up if there
is liquid/gel detergent in the
detergent box. If there is little or
no detergent in the detergent
box, the indicator will flash.
C
When the Automatic Liquid/
Gel Detergent indicator starts
to flash, there is enough
detergent for at least 5 washing
cycles.
Dishwasher / User's Manual