Using The Multi-Purpose Screwdriver; Using The Spool Stand - Baby Lock Solaris 2 Instruction And Reference Manual

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
Using the Multi-purpose
Screwdriver
Since the screwdriver can be changed to three
different positions, it can be extremely useful for
the various machine preparations. With this
machine, position "1" and position "3" are used.
■ Position "1"
You can install/remove the presser foot holder,
needle clamp screw.
■ Position "3"
The multi-purpose screwdriver can be positioned
over the screw on the embroidery frame to tighten
the screw after hooping the fabric or when removing
the fabric.
Note
• When rotating the multi-purpose
screwdriver, do not forcefully rotate it in the
direction that it does not rotate; otherwise, it
may break.
24

Using the Spool Stand

The included spool stand is useful when using
thread spools with a large diameter (cross-wound
thread). The spool stand can hold two spools of
thread.
1 2
4 5
No. Part Name
1 Spool stand
2 Spool cap (XL) × 2
3 Spool holder × 2
4 Spool cap base × 2
5 Spool felt × 2
6 Ring × 4
* No.2 to No.6 are included in a plastic bag.
CAUTION
• Do not lift the handle of the machine while the
spool stand is installed.
• Do not push or pull the telescopic thread
guide or spool pins with extreme force,
otherwise damage may result.
• Do not place any object other than spools of
thread on the spool support.
• Do not try to wind thread on the bobbin while
sewing using the spool stand.
■ Warning Label
This product contains magnets.
a Be careful not to pinch your fingers or any objects
between the spool stand and the upper cover of
the machine.
b Be sure to keep the magnets away from precision
electronics, computer disks, credit cards with a
magnetic stripe, etc.
c Do not use the spool stand if you have a
pacemaker.
3
6
Part Code
XH1607-001
XE0779-001
XA0679-050
XE0780-001
XC7134-051
026030-136