Remove The Gl-Board - Panasonic TH-50PY850H Service Manual

3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6
Caution:
• Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel, and
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.
7.24. Remove
1. Remove the Cabinet assy. (See section 7.23.)
2. Disconnect the relay connectors.
3. Remove the screws (×2
4. Remove the Speaker (Squawker/L, Squawker/R).

7.25. Remove the GL-Board

1. Remove the Cabinet assy. (See section 7.23.)
2. Remove the Speaker (Squawker /R). (See section 7.24.)
3. Remove the screws (×3
).
shield R.
4. Disconnect the connector (GL02).
5. Remove the screws (×2
25
the
(Squawker)
each).
) and remove the Bottom
) and remove the GL-Board.
Speaker