Table of Contents
Advertisement
6 Troubleshooting Guide
Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
6.1.
Check of the IIC bus lines
6.1.1.
How to access
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote con-
trol for more than 3 seconds.
6.1.2.
Screen display
6.1.3.
Check Point
Confirm the following parts if NG was displayed.
6.1.4.
Exit
Disconnect the AC cord from wall outlet or switch off the power with the [POWER] button on the main unit.
13
Advertisement
Table of Contents
