Troubleshooting Guide; Check Of The Iic Bus Lines - Panasonic TH-P50ST50A Service Manual

Plasma television
Hide thumbs Also See for TH-P50ST50A:
Table of Contents

Advertisement

7 Troubleshooting Guide

Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
7.1.

Check of the IIC bus lines

7.1.1.
How to access
7.1.1.1.
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
7.1.1.2.
Self-check indication and forced to factory shipment setting:
Caution:
New key will be generated and previous TV programmes recorded in USB HDD will not be viewed. (See USB HDD
Recording) (A/Z only)
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.
7.1.2.
Screen display
7.1.3.
Check Point
Confirm the following parts if NG was displayed.
7.1.4.
Exit
Disconnect the AC cord from wall outlet or switch off the power with [ Power ] button on the main unit.
DISPLAY
Check Ref. No.
TUN
TU6705
STBY
IC8000
MEM1
IC8902
MEM2
IC8900
PANEL
IC9300
TEMP
IC2001
LAN
IC8650
ID
ID2
BT
IC8000, A50
WiFi
IC8000, JK8605
Description
TUNER
A-BOARD
PEAKS-LD4(STM)
A-BOARD
PEAKS EEPROM
A-BOARD
NAND FLASH
A-BOARD
PD6H
A-BOARD
TEMP SENSOR
A-BOARD
ETHERPHY
A-BOARD
ID
A-BOARD
ID2
A-BOARD
BLUETOOTH
A-BOARD/BLUETOOTH
WiFi
A-BOARD/WiFi
18
Check Point

Advertisement

Table of Contents
loading

Table of Contents