Transferring Images To A Macintosh - Pentax Optio S5i Connection Manual

Transferring Images to a Macintosh

Connect your camera to your Macintosh to transfer images.
We recommend using a AC Adapter D-AC8 (optional) when
connecting your camera to your Macintosh. Your image data could
be corrupted if your batteries run out during image transfer.
Connecting the Camera and Macintosh
1
Turn your Macintosh on.
2
Turn your camera off and connect it to the Macintosh
with the USB cable.
Make sure the SD Memory Card is inserted in the camera.
3
Turn your camera on.
The camera is recognized as [NO_NAME] ([untitled] on
Mac OS 8.6-9.2) on the desktop. The folder name can be
changed.
If the digital camera is connected to your Macintosh in [PictBridge]
USB Connection mode, the digital camera will not be properly
recognized as a storage device. In that case, disconnect your
camera from the Macintosh and follow the instructions in "Setting Up
Your Digital Camera" (
[PC], and then reconnect the USB cable.
24
1 p.17) to set the USB Connection mode to