Table of Contents
Advertisement
6
Set the stitching parameters.
Click the Stitching method button in the
window 2 (C) to open the stitching parameter
selection window.
You can choose from [Big Plane] or [Cylinder] for
the stitching method. Here, you will create a flat
panorama. Click the [Big Plane] button and [OK].
7
Click the [Automatic alignment] button.
The selected images appear in panorama format.
8
Correct the image positioning.
In the window 2, click an image you want to move, and then the image
is framed in red and able to move. Hold down the mouse button and
drag the image to adjust the stitching position.
For easier adjustment of two adjacent images, click the [Align 2
images] tab to enlarge the section where the images overlap.
9
Click the [Stitch] button.
Stitching starts. When finished, the stitched picture is displayed.
46
[Align 2 images] tab
Hold down the
mouse button and
adjust the stitching
position.
Advertisement
Table of Contents
