Carlisle P500 User's Manual Manual

Passive Probe
P500 User Manual Guide
SPECIFICATIONS, PERFORMANCE AND COMPLIANCE
Technical Specifications
Dividing ratio
Input capacitance
Compression range
Frequency range
Rise time
Cable length
Input impedance
Rated voltage when using touch-protected test equipment [a]
[a] Frequency-dependent see derating curve
PB-Free
*EU REACH **EU RoHS2
Processing
Compliant Compliant
Compliant
www.CarlisleIT.com
10:1
15 pF +/- 2 pF
10 pF ~ 25 pF
DC-200 MHz
< 2.1 ns
1.4 m
10M ohms ± 1%
***China
WEEE ELV
RoHS
Compliant Compliant
Compliant
UG-10173-011219
Passive Probe
P500 User Manual Guide
OVERVIEW AND SAFETY PRECAUTIONS
The P500 family of passive probes and accessories provide accurate and safe attachment
to AC and DC test circuits for measurement of signals on analog and digital oscilloscopes in
Category Ill and IV circuits. This probe and accessories adhere
to IEC 61010-031 edition 2015.
PASSIVE PROBE
MARKINGS
Failure to follow all of the instructions
in this manual may defeat the safety
features and result in injury or death.
WARNING
Failure to follow all instructions in this manual may defeat the safety features and result in
injury or death.
Before using the P500, read and understand the safety warnings, ratings and instructions
contained in this manual.
The P500 family of probes and accessories are not intended for use in wet or damp
locations. Electric shock may result.
There are no user serviceable parts in the P500 probe or accessories.
Do not attempt to open or disassemble.
Probe must be fully connected to the measurement instrument prior to connection to the
device under test.
Probe must be disconnected from the device under test prior to disconnecting from the
measurement instrument.
www.CarlisleIT.com
Double Insulated