Displaying And Copying Images Using Acdsee - Pentax Optio Optio S Operating Manual

Displaying and copying images using ACDSee™

z
x
c
v
b
n
m
,
108
Turn your Macintosh on.
Make sure the camera is turned off and connect it to
your Macintosh with the USB cable.
Make sure that there is an SD Memory Card/
MultiMediaCard in the camera.
Turn your camera on.
Your camera can be found on the desktop as
[untitled]. You can change the folder name.
Click the [ACDSee™] folder on the hard
drive.
Double-click the [ACDSee™] program icon.
Open the camera folder.
Camera images can be found in [untitled (or the name on
the volume label on the SD Memory Card/MultiMediaCard,
if there is one)]
number.)
Select the image you want to view from the list.
Double-click the selected image to enlarge it to full-screen
display.
Copy the image to your Macintosh.
Refer to the operating manual for your Macintosh for
instructions on copying or moving files.
Before editing an image, copy it to your Macintosh first.
[DCIM] [XXXPENTX]. (XXX is a 3-digit