Table of Contents
Advertisement
Displaying and Copying Images on your PC
An explanation of how to display / copy images using ACDSee for
PENTAX is shown below.
1
Turn your computer on.
2
Turn your camera off and connect it to the PC with the
USB cable.
When copying or displaying images recorded on a SD Memory
Card / MultiMediaCard, please check that the card is inserted in
the camera before connecting.
When copying or displaying images recorded in the internal
memory, please check that any cards have been removed from the
camera before connecting to your PC.
3
Turn your camera on.
The Device Detector screen is displayed automatically.
If the Device Detector screen is not displayed, display / copy the
images following the steps in "When the Device Detector screen is
not displayed." on page 9.
4
Confirm that [Copy images to
hard drive] and [Launch
ACDSee] are checked, and
click [Next].
8
Advertisement
Table of Contents
