Advertisement
Quick Links
VR43
Vandal and Weather Resistant Keypad.
FEATURES
•
Suitable for indoor and outdoor usage.
•
Durable and stylish metal keypad construction (satin chrome
plated zinc die cast).
•
5 to 14 Volt D.C. operation.
•
Vandal Resistant.
•
Weather Resistant (IP67).
•
Outputs Presco™ and Weigand data.
•
Backlighting on keys standard.
•
Compatible with all Nidac Presco decoders.
•
Fully configurable for custom Weigand modes.
•
Operating temperature range of -20ºC to 70ºC.
•
36 month (3 year) manufacturers warranty.
PACKAGE CONTENTS
Included in the package for your VR43 keypad is:
1 x VR43 keypad.
1 x Installation manual (this document).
1 x VR43 keypad cable with rubber sealing boot.
1 x Hex Allen key to remove screw for fascia.
1 x Mounting template.
If any of these items are missing please contact your supplier.
N761
1
TABLE OF CONTENTS
Features .................................................................................... 1
Package Contents.................................................................... 1
Specifications........................................................................... 2
Dimensions............................................................................... 2
Wires.......................................................................................... 3
Installation ................................................................................ 4
Using the VR43 keypads with Presco™............................... 5
VR43 to PAC1/PAC2 wiring diagram.................................. 6
VR43 to KC2, KC6 & PDA wiring diagram ......................... 6
Using the VR43 keypads with Weigand ............................... 7
VR43 to Weigand wiring diagram ....................................... 7
Options...................................................................................... 8
General Options ................................................................... 8
Weigand Options ................................................................. 9
Presco™ Options............................................................... 11
Setting the options via the VR43 keypad ......................... 12
Warranty.................................................................................. 13
Other Products....................................................................... 13
SPECIFICATIONS
Voltage:
4.9V to 14.5V D.C.
Current:
40mA max @ 12V D.C. (without backlighting)
Backlighting:
25mA @ 12V D.C.
Dimensions:
132mm x 92mm x 20mm (H x W x D).
Weight:
780 grams (including cable).
Ingress Protection Rating:
DIMENSIONS
i
IP67
2
PAGE
Advertisement
Related Manuals for Nidac Presco VR43
Summary of Contents for Nidac Presco VR43
- Page 1 • Outputs Presco™ and Weigand data. • Backlighting on keys standard. • DIMENSIONS Compatible with all Nidac Presco decoders. • Fully configurable for custom Weigand modes. • Operating temperature range of -20ºC to 70ºC. • 36 month (3 year) manufacturers warranty.
- Page 2 WIRES INSTALLATION There are 12 wires for the VR43 keypads, not all will be needed 1. Using the supplied template mark out the location of the for each installation, The unused wires should always be mounting screws and the cable exit. Drill out all points as terminated and left unconnected.
- Page 3 PIM (series 2 or later) and the PIM-VR software The Pink wire needs to be connected to 0V (the Black wire) to available from website http://www.nidac.com set Weigand output mode (unless the unit has been downloads section under software. Refer to the help file...
- Page 4 (excluding accidental or malicious damage) under the 36 month warranty offered from the date of purchase. As NIDAC Security Pty. Ltd. or it’s agents do not perform the final installation, inspection or training in the use of this product, they cannot be held liable for injury, loss or damage directly or consequentially arising from the use or misuse of this product.