Related Manuals for Amada HFE M2
Summary of Contents for Amada HFE M2
- Page 1 HYDRAULIC PRESS-BRAKE OPERATOR’S MANUAL X41176 B AMADA Europe S.A. BP 41040 – 95912 ROISSY AÉROPORT CDG CEDEX Tél : 01 49 90 30 00 – Fax : 01 49 90 31 99 Original...
- Page 2 Amada, Tremblay, December 2002. Any representation, translation, adaptation or reproduction, even partial, by any method or in any country without prior permission is illegal and would make the offender subject to legal action. 2/12 CONTENTS Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B...
- Page 3 LIST OF ADDENDA Modification coming Reason Description Application from CONTENTS 3/12 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010...
- Page 4 C – It is strictly prohibited to use this machine if protective covers have been removed or modified. Only personnel - authorized and qualified by AMADA – is entitled to do so when maintenance operations turn out to be necessary FOR ALL PROBLEMS DURING MACHINE INSTALLATION Telephone ...
- Page 5 2.7. RULES FOR SAFE OPERATION................19 2.8. WORKSTATION LIGHTING ..................26 2.9. MACHINE OPERATING AND STORAGE CONDITIONS........27 2.10. INFORMATION ON NOISE ..................28 2.11. NORMAL USE, RESERVATIONS, AND EXCLUSIONS ........29 CONTENTS 5/12 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010...
- Page 6 3.8.3. DESCRIPTION OF Z1 AND Z2 AXES (FINGERS)..........35 3.9. DESCRIPTION OF THE FINGER SUPPORTS ............36 3.10. DESCRIPTION OF THE LIGHT GUARD ..............39 3.10.1. MECHANICAL UNIT ..................40 3.10.2. LIGHT GUARD ....................41 6/12 CONTENTS Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B...
- Page 7 5.1. CLEANING ........................2 5.2. INSTALLATION OF CONTROL DEVICES..............2 5.3. CHECKING THE MAINS POWER SUPPLY ............... 4 5.4. MACHINE LEVELLING....................4 5.5. MACHINE COMMISSIONING ..................5 5.6. OVERALL CHECK ......................6 CONTENTS 7/12 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010...
- Page 8 6.9.7. AUTOMATIC MODE .................... 59 6.9.8. TEACHING MODE ....................62 6.10. EDIT MENU........................ 65 6.10.1. PUNCH EDIT ....................... 65 6.10.2. PUNCH HOLDER EDIT ..................67 6.10.3. DIE EDIT ......................68 8/12 CONTENTS Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B...
- Page 9 6.15. RESTORE MENU ....................... 84 6.15.1. RESTORE PROGRAMS ..................84 6.15.2. RESTORE PUNCHES ..................87 6.15.3. RESTORE PUNCH HOLDER................87 6.15.4. RESTORE DIES ....................87 6.15.5. RESTORE DIE BLOCK ..................87 CONTENTS 9/12 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010...
- Page 10 7.5.2. “AMACLIP” PUNCH CLAMPING SYSTEM ............15 7.5.3. TOOLING INSTALLATION PROCEDURE (STANDARD) ....... 21 7.6. OPTIONS AND ACCESSORIES ................. 29 7.7. PUNCHING........................29 7.8. MAGNETISM ....................... 29 7.9. BENDING CHART ....................... 30 10/12 CONTENTS Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B...
- Page 11 ANNEXE A – ANNEXE B – MACHINE SCHEMATICS AND LISTING (see in the elctric cabinet of the machine). ANNEXE C – SUPPLIERS DOCUMENTATION ANNEXE D – SPECIAL MACHINES ANNEXE E – OPTIONS CONTENTS 11/12 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010...
-
Page 12: Important Note
At the time of delivery, this file is placed inside the document tray attached to the inner side of the electric cabinet door. 12/12 CONTENTS Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B... -
Page 13: General Description
1. GENERAL DESCRIPTION GENERAL DESCRIPTION Chapter 1 1/20 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010... - Page 14 Figure 1.1 2/20 Chapter 1 GENERAL DESCRIPTION Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B...
- Page 15 (Fig. 1.1) and its connection to the electrical and pneumatic supply systems. This product line includes the following models: - HFE M2 50 to 400 tons Depending upon the models, lengths start 1.2 meters up to 6 meters Our models are supplied: ...
- Page 16 Figure 1.2 F1 and F’1 = Bending force A and A’ = Counter acting points 4/20 Chapter 1 GENERAL DESCRIPTION Issue 05/2010 OPERATOR’S MANUAL HFE M2 – X41176B...
- Page 17 Lower Beam (LB). These machines can be equipped with various options (back gauge, front gauge, etc.), with all Amada tools, and other traditional tools, as well as a range of various accessories. (Contact our Local Sales Representative to discuss your specific requirements.) For items heavier than 25 kg, a handling device –...
- Page 18 AMADA SYSTEM: Slotted beam (for 50 to 100 -ton press brakes). The lower beam is a slotted plate. The arrangement, size, and shape of the slots are designed to allow the lower beam to deflect in the same direction and with the same deflection as the upper beam under the action of the bending force.
- Page 19 Valid for 320 and 400 tons Fig. 1.3’ Fig. 1.4 F1 and F’1 = Bending force A and A’ = Counter acting points GENERAL DESCRIPTION Chapter 1 7/20 OPERATOR’S MANUAL HFE M2 – X41176B Issue 05/2010...
- Page 20 1 à 100 Max. return speed mm/s AMADA EUROPE S.A. constantly strives to improve its products, and reserves the right to alter their characteristics at any time. (1) - Value affecting the smallest allowable length of tools (§ 7.5). (2) - The dimensions are with the arm and the NC maximum extended on the exterior, and all doors closed..
Need help?
Do you have a question about the HFE M2 and is the answer not in the manual?
Questions and answers
want to know tolerances for angles and length to put on drawing specs
Hello, I would like help to identify the contact pins for the card attached to the Amada bending machine.