Advertisement
All manuals and user guides at all-guides.com
Using Your Radio
Operation
Turning On Your microTALK
On/Off Power
To Turn On Your Radio:
1.
Your microTALK
ready to receive transmissions. The radio is
always in
Call or Mode buttons
Battery Low
Battery Low
When
will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.
Auto
Battery Save Mode
Your microTALK
designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to Battery Save Mode
and
This will not affect the radio's ability to receive
incoming transmissions.
Communicating with Another Person
Talk Button
To Talk To Another Person:
1.
2. With the microphone about two (2) inches (5 cm)
2 inches (5 cm)
From Mouth
3. Release the Talk
You cannot receive incoming calls while pressing
the Talk
English
6
Press and hold the
Power button until you
hear a series of audible tones indicating the
radio is On.
®
radio is now in
Standby Mode except when the Talk,
are pressed.
battery power is low, the Battery Low icon
Battery Save
®
radio has a unique circuit
Power Saver icon will flash in the display.
Press and hold the Talk
from your mouth, speak in a normal voice.
button when you
talking and listen for a response.
button.
Both radios must be tuned to
the same channel to communicate.
®
Radio
Standby Mode,
button.
are finished
Introduc
Mode B
•
•
•
Channe
•
Channe
Advertisement
