Pioneer X-CM30 Operating Instructions Manual page 13

Advanced CD or MP3/WMA disc playback (continued)
n Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until "RANDOM" icon light up. Press the
button.
To cancel random play:
Press and hold the PLAY MODE button. "RANDOM" icon
will disappear.
Notes:
l During random playback, repeat function is not
possible.
l Playback will stop after all the tracks is played randomly.
l If you press the button during random play, you can
move to the track selected next by the random
operation. On the other hand, the
allow you to move to the previous track.
l The beginning of the track being played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
n Programmed play
You can choose up to 32 selections for playback in the order
you like.
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save mode.
2
Press the or buttons on the remote control to
select the desired track.
Selected track number
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you make a mistake, press the MEMORY
button repeatedly to select the wrong track then press
the CLEAR button.
5
Press the / button to start playback.
6
Press the CD
appear.
/
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit,
press the
"MEMORY" indicator will disappear and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY"
indicator will be displayed. Press the MEMORY button
repeatedly until last track appears. Then follow steps 2 - 4 to
add tracks. The new tracks will be stored after the last track
of the previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
press the MEMORY button repeatedly.
To clear the programmed selections:
button does not
During stop mode, press the MEMORY button repeatedly to
select the unwanted track. Press the CLEAR button to delete
it.
Notes:
l When a disc is ejected, the programme is automatically
cancelled.
If you press the STANDBY/ON button to enter the stand-
l
by mode or change the function from CD to another, the
programmed selections will be cleared.
During the programme operation, random play is not
l
possible.
En-13
button. The total number in memory will
button on the remote control twice. The