Sanyo PLC-HP7000L Owner's Manual page 54

Setting
Display
This function decides whether to display On-Screen
Displays.
On ......................... Show all the On-Screen displays. Use
Countdown Off .... Show the input image instead of
Off ........................ Hide the On-Screen Displays except:
Background
Select the background screen for when no input signal is
detected. Press the Point ▲▼ buttons to switch among
each option.
Blue......Project a blue background.
User......Project an image captured in the Logo setting.
It is invalid when there is no image.
Black......Project a black background.
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo
with Logo select, capture, Logo PIN code lock and
Logo PIN code change functions.
Note:
W hen On is selected in the Logo PIN code lock
function, Logo select, Capture and Logo PIN code
change cannot be selected.
Logo select
This function decides on the starting-up display
from among following options.
Off ......... Show the countdown display only.
User ....... Show the image you capture.
Default .. Show the factory-set logo.
54
this function when you want to project
images after the lamp becomes bright
enough. The factory default setting is
in this option.
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
● On-Screen Menu
● Power off? (p.24)
● No signal for Power management.
(p.62)
● Please wait . . .
● White Arrows for panning mode
(p.44)
● P-timer
● Simple mode
● Video delay control
● Picture in Picture
● Corner pattern
Logo select