Table of Contents
Advertisement
AXIS Q3538-SLVE Dome Camera
Configure your device
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Video > Image > Wide dynamic range.
2. Turn on WDR.
3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Stabilize a shaky image with electronic image stabilization (EIS)
Electronic Image Stabilization (EIS) can be used in environments where the product is mounted in an exposed location and subject to
vibrations, for example, wind or passing traffic.
EIS makes the image smoother, steadier and less blurry. It also reduces the file size of the compressed image and lowers the
bitrate of the video stream.
Note
The image is cropped slightly when EIS is enabled, lowering the maximum resolution.
1. Go to Video > Installation > Image correction.
2. Turn on Image stabilization.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
1. Go to Video > Privacy masks.
Image without WDR.
Image with WDR.
7
Advertisement
Table of Contents
