Sanyo PLC-XU4000 Owner's Manual page 36

Computer Input
Custom adj .
Adjust the screen scale and position manually with this
function.
Press the Point ► button at Custom and the Custom is
displayed on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and
becomes unavailable. Adjust Scale H,
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at yes. When Custom
is selected, the saved scale or position is
used.
Reset ................. Reset all the adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
D . zoom + appears. Press the SELECT button to expand the
image size. Use the Point
The Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM or the SELECT button on the remote control.
▲
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears
and D . zoom – appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM the SELECT button on the remote control.
▼ or
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM buttons and the SELECT button.
▲▼
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
27-28) again, or adjust the screen size with the D.ZOOM
buttons.
▲▼
36
buttons to pan the image.
▲▼◄►
 Note:
• When no signal is detected, Normal is
set automatically and the Aspect dialog
box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
Remote Control
POINT
buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
Note:
• The minimum compression ratio is
limited depending on the input signal,
when the Keystone function is working
or when the custom is selected for the
screen size.
• True and Digital zoom +/– are disabled
and cannot be displayed when 480i,
575i, 480p 575p, 720p,1035i or 1080i is
selected in the PC System Menu (p.29).
• Digital zoom +/- cannot be selected
when True is selected.
• The minimum compression ratio is
limited at Normal screen size.
▲▼◄►