Sanyo PLC-XU4000 Owner's Manual page 26

Basic Operation
NO SHOw button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When the projected
image is captured and is set as User in the Logo selection
(p. 48), the screen changes each time you press the NO
SHOW button as follows.
black out → the captured image → normal →
P-TIMER button
Press the P-TIMER button on the remote control to operate
the Count up/Count down function. See page 52 for details
of Setting for the P-timer function.
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press and hold the P-TIMER button for
a few seconds.
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 33, 41 for
details.
SCREEN button
Select the screen size (See pages 35-37, 44-45 for details).
26
No show disappears after 4 seconds.
• • • • •
P-timer
P-Timer display

002:02
SCREEN button
P-TIMER button
NO SHOw button
IMAGE button
Note:
See the previous page for the description of
other buttons.