Sanyo PLC-XU4000 Owner's Manual page 32

4000 ansi, xga, inteligent lamp system
Hide thumbs Also See for PLC-XU4000:
Table of Contents

Advertisement

Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the Point ► button or the SELECT button. Move the
highlight to the Mode that you want to clear and then press
the SELECT button.
Store
To store the adjusted data, select Store and then press the
Point ► button or the SELECT button. Move the highlight
to one of the Modes 1 to 10 in which you want to store, and
then press the SELECT button.
 Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.29).
• When input computer signal to the projector, PC adjust
will become available.
32
Mode free
Values of Total dots, Horizontal,
Vertical, Display area H and
Display area V.
Store
Press MENU button
to close this dialog
box.
This Mode has stored
parameters.
Vacant
Press SELECT button to
store adjusted data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xu4000 - 4000 lumens

Table of Contents