How do i connect my wireless headset with the link 14201-41 to my cisco 8941 or 8945 desk phone so i have remote call control using my headset (2 pages)
Page 1
Connection: 1. Connect the supplied 4-pin RJ10 to RJ10 connection cable with the socket marked “ phone” on the base of the Jabra Pro 94x0 and the other end with the “handset” socket on the AZ adapter. 2. Now insert the 8-pin RJ45 plug of the Jabra 8800-00-93 connection cable in the "AUX"...
Page 2
Set the phone set-up switch to position "A". Microphone level setup: Remove the cover from the base of the Jabra Pro 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quite to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.
Page 3
Activate the "remote headset" function in your OpenPhone phone as follows. Please enter the following button combination in your OpenPhone 63/65: > MENU > SETTINGS > PERIPHERALS > additional phone selection > "REMOTE HEADSET" https://www.jabra.com/supportpages/jabra-pro-9450/9450-65-707-105/faq/7f805f9f-406c- Page 3 of 3 4449-a096-33aa06e29619...
Need help?
Do you have a question about the Pro 9450 Mono Flex and is the answer not in the manual?
Questions and answers