Advertisement
Jabra Pro 9450 Mono Flex
How to connect my Jabra PRO 9450 with Nortel IP 1120E,
1140E, 1150E, 1165E
Prerequisite:
Jabra PRO 9450 + Jabra LINK 14201-32
In combination with one of the following phones:
Nortel IP 1120E
Nortel IP 1140E
Nortel IP 1150E
Nortel IP 1165E
from firmware release 3.1 for IP phones.
Connection:
1. Connect the 1-sided end (USB plug) of the EHS adapter with the USB
socket on your phone.
2. Insert the RJ9 plug into the socket marked with a "phone" symbol and
the RJ45 plug into the socket marked with "AUX" on the base.
You now have the option of setting up the headset on your phone via the
automatic or manual configuration.
Automatic configuration:
To start the automatic configuration, ask someone to call you on this
phone and wait at least 10 seconds before taking the call. The appropriate
EHS mode should now be installed.
https://www.jabra.sg/supportpages/jabra-pro-9450/9450-25-707-103/faq/990d213f-23b1-
4173-877c-de7230746d09
10/11/2022 06:45
Page 1 of 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jabra Pro 9450 Mono Flex
Summary of Contents for Jabra Pro 9450 Mono Flex
- Page 1 10/11/2022 06:45 Jabra Pro 9450 Mono Flex How to connect my Jabra PRO 9450 with Nortel IP 1120E, 1140E, 1150E, 1165E Prerequisite: Jabra PRO 9450 + Jabra LINK 14201-32 In combination with one of the following phones: Nortel IP 1120E...
- Page 2 Set the phone set-up switch to position "A". Microphone level setup: Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.
- Page 3 10/11/2022 06:45 https://www.jabra.sg/supportpages/jabra-pro-9450/9450-25-707-103/faq/990d213f-23b1- Page 3 of 3 4173-877c-de7230746d09...
Need help?
Do you have a question about the Pro 9450 Mono Flex and is the answer not in the manual?
Questions and answers