Jabra Link 14201-20 How To Connect

Hide thumbs Also See for Link 14201-20:

Jabra Link 14201-20

How to connect my Jabra GN9330e with Avaya 1408, 1416,

1608, 1616, 9404, 9408, 9504, 9508, 9608, 9610, 9611G, 9620,

9620C, 9620L, 9621G, 9630, 9630G, 9640C, 9640G, 9641G,

9650, 9650C, 9670

Prerequisite:

Jabra GN9330e + Jabra LINK 14201-20

In combination with one of the following Avaya phones:

1408 / 1416

1608 / 1616

9404 / 9408

9504 / 9508

9608 / 9610 / 9611G / 9620 / 9620C / 9620L / 9621G

9630 / 9630G / 9640C / 9640G / 9641G / 9650 / 9650C / 9670

1. Insert the supplied RJ9 to RJ9 connection cable into the socket of

your Jabra GN9350e base marked "phone" and the other end into the

socket of the EHS adapter marked with the "phone" symbol.

2. Now connect the end of the RJ12 to RJ12 connection cable (EHS

adapter) marked in red to the socket of the EHS adapter marked with

"AUX" and the socket of your Jabra GN9350e base marked with "AUX".

3. Now connect the RJ9 to RJ9 connection cable marked white "C" to the

socket of the EHS adapter marked with "Headset/Handset" and with

the "headset" socket of your phone.

Important: 1408/1416 and 9404/9408 phones, use the cable marked

https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/4b5e7a92-

1178-46f7-9a07-1c396e2288bc

18/11/2022 13:25

Page 1 of 3

Table of Contents

Do you have a question about the Link 14201-20 and is the answer not in the manual?

Page 1 Connection: 1. Insert the supplied RJ9 to RJ9 connection cable into the socket of your Jabra GN9350e base marked "phone" and the other end into the socket of the EHS adapter marked with the "phone" symbol. 2. Now connect the end of the RJ12 to RJ12 connection cable (EHS adapter) marked in red to the socket of the EHS adapter marked with "AUX"...
Page 2 Software setup: Put the headset into the base and activate the "DHSG" mode. Hold down the "phone" button on the base of the Jabra GN9330e for approx. 6 seconds until the online display (blue LED) on the headset starts to flash. The current software is displayed to you by activating the volume controller in the form of the charge display (green LED).
Page 3 Headset answer/end: As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the "answer/end" on the headset; by pressing again the call is ended. https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/4b5e7a92- Page 3 of 3 1178-46f7-9a07-1c396e2288bc...