How do i connect my headset with a polycom ip 320, ip 321, ip 330, ip 331, ip 335, ip 430, ip 450, ip 550, ip 560, ip 650, ip 670 or vvx series so i can answer and end calls electronically (9 pages)
1. Welcome Thank you for using the Jabra Link 400. We hope you will enjoy it! Jabra Link 400 features • Up to 150 meters/490 feet DECT wireless range • Goes beyond the highest DECT Security Level C • Together with a Jabra Engage DECT headset,...
3. Status LEDs Connected to headset Active call Music playback Microphone muted Call on hold Connected to Microsoft Teams* Firmware updating Microsoft Teams notification* Incoming call Pairing mode Voice guided settings menu Conference pairing mode / connected to multiple headsets Conference mode active Additional headset connected * Microsoft Teams variants only...
4. Pair with a Jabra Engage headset To manually pair a headset with a Jabra Link 400: 1. Ensure the headset is turned off. To turn off the headset press and hold the Call button for 5 seconds. 2. Press and hold the Call button on the headset for 4 seconds until the LED flashes blue and you hear a tone.
Page 8
3. Press and hold the button on the Jabra Link 400 for 1 second to complete the pairing with the headset. The LED will turn solid blue when the pairing is complete. The Jabra Link 400 will remember the pairing with the headset, even when unplugged from your computer.
The next time you plug it into your computer, turn on the headset and wait for it to connect to the Jabra Link 400. It may take up to 15 seconds for the Jabra Link 400 to be detected by the computer and then complete the connection to the headset.
Call button on the additional headset for 4 seconds. 3. Press and hold the button on the Jabra Link 400 for 1 second until the LED flashes orange rapidly to pair with the headset.
Page 11
The conference mode will continue for all other headsets. Conference mode settings can be adjusted using Jabra Direct to allow additional headsets to remain connected until the primary headset is turned off or the Jabra Link 400 is disconnected.
Jabra Direct. To manually reset the Jabra Link 400, press and hold the button on the adapter while plugging it into a USB port. After the Jabra Link 400 is reset, it is necessary to re-pair it with the headset.
8. Software 8.1 Jabra Direct Jabra Direct is software designed to support, manage, and enable optimal functionality for your Jabra devices. Download via jabra.com/direct...
8.2 Jabra Xpress Jabra Direct is software designed for mass deployment, management and analytics of Jabra headset and devices. Download via jabra.com/xpress 8.3 Firmware update Jabra Direct will notify you when firmware is updating, or when a firmware update is available.
9.1 FAQ View the FAQs at jabra.com/support 9.2 How to care for your device • It is recommended to keep the Jabra Link 400 between -5°C and 45°C (23°F and 113°F). • If the Jabra Link 400 becomes dirty, it is...