Related Manuals for Blueair Blue Pure 411a Max
Summary of Contents for Blueair Blue Pure 411a Max
- Page 1 User manual Scan here to access additional product, registration, warranty information and FAQs. Blue Pure 411a Max...
-
Page 2: Safety Information
Blue Pure 411a Max 3234101100 Blue Pure 411a Max air purifier is electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock or injury. This appliance is not intended for use by persons (including children) with reduced physical,... - Page 3 When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug. Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
-
Page 4: Regulatory Information
Regulatory information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 5: Product Map
Product map User interface Fan motor Washable fabric pre-filter Air outlet Silencer Air quality indicator (AQI) Particle & carbon filter Air quality status (PM 2.5) The air purifier has a particle sensor to measure the fine particles (PM2.5) level. The LED indicator displays air quality status in 5 colors from excellent (blue) to very polluted (red). -
Page 6: Getting Started
Getting started Indicators ON/Standby button Auto mode Fan Speed button Night mode (lowest speed setting) Speed 1 Speed 2 Speed 3 Filter replacement Two button control Press the ON/Standby button to turn the air purifier. Adjust the mode and the fan speed using the Fan Speed button. This air purifier has a total of four fan speeds - Night mode being the lowest/most silent one, Speed three being the highest one. - Page 7 How to use tips Change brightness Step 1 Enable/disable Child lock Press the Fan Speed button and On/ Long press On/Standby button for Standby button at the same time. about 5 seconds (until all the LEDs Hold for three seconds. of the interface light up and blink once).
-
Page 8: Maintenance Information
Maintenance information Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance. Changing your filter When your air purifier’s indicator light turns red, it’s time to change the main filter. This will occur some time between 6 and 9 months of operation, depending on usage and your air quality conditions. - Page 9 Cleaning your washable pre-filter Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter´s label. Hang to dry.
-
Page 10: Troubleshooting
Select the Night mode on your air purifier, or set your LED brightness preferences from your air purifier according to the instructions in this guide. For more information and troubleshooting tips, please check the Support page on www.blueair.com... - Page 11 Blueair Inc. 125 S Clark, Suite 2000, Chicago, IL, 60603 USA Tel: +1 888 258 3247 info@blueair.com...
Need help?
Do you have a question about the Blue Pure 411a Max and is the answer not in the manual?
Questions and answers