Sanyo Xacti VPC-HD700 Instruction Manual page 94

SHOOT A STILL IMAGE WHILE RECORDING A
VIDEO CLIP
HINT
i When shooting a still image while recording a video clip, the flash does not
operate.
i The face chaser feature (page 116) are inoperative.
Why does recording stop?
i When you capture a still image during video clip recording, recording
briefly stops while the image is being saved. Video clip recording resumes
after the still image is saved.
i When the remaining video recording time becomes approximately
50 seconds, it will no longer be possible to capture a still image while
recording a video clip. The exact remaining recording time at which this
occurs will differ depending on the subject and on the video clip mode
setting (page 92). If you intend to capture a still image while recording a
video clip, it is suggested that you take note of the remaining video
recording time.
About the recording size of still images
i If the still image shooting size (page 93) is set to k, it automatically
changes to w and the image is captured.
79
English