Sanyo VPC-HD2000ABK Instruction Manual page 168

INTRODUCTION TO THE OPTION SETTING MENU
3
Toggle the SET button up or down to select the desired parameter.
4
Press the SET button.
5
Press the MENU button.
h This completes the TV output setting.
HINT
About the HDMI-CEC function
i This is a system control function by which, through an HDMI cable, a
control signal is output to electronic devices and the operation of multiple
devices is coordinated.
i The HDMI-CEC function will operate correctly only when the camera is
connected to a SANYO TV that incorporates the HDMI-CEC function.
i When the HDMI-CEC function is used, your TV's remote control unit can
be used to operate the camera playback; however, it does not work to turn
the camera ON. In addition, in the playback mode, the camera's power
save function is disabled.
i For information concerning connecting and operation, please see your
TV's instruction manual.
(As of May 2008, SANYO TVs that incorcorporate the HDMI-CEC function
have not been released.)
147
English