Windows 7 System Application - ViewSonic ViewPad 10 User Manual

Windows 7 system application

Start use your VPAD10
Connect the VPAD10 to the external power source via the AC adapter, press and hold the power button for 2~3 seconds , then
start on your VPAD10. Release the press when the power indicator is light up in blue. And then follow the on-screen instructions to
complete the initial Operating system setup.
The system home (destop) screen will appear as follows (The device's built-in G-sensor movement and changes its angle/
orientation).
ViewSonic
Landscape view
Portrait view
10
VPAD10