Advertisement
5) Please use the supplied or the recommended accessories.
6) Do not use the instrument once the it woks abnormal or damaged.
7) Do no operate the instrument near heat source.
8) Refer to the installation instructions for details on installing the product so it has
proper ventilation.
9) Please use the instrument on a flat working surface, and do not put anything on the
instrument when it is in use.
10) Keep the instrument away from strong electromagnetic field interference source.
11) Avoid direct sunlight.
12) Face to the back of the instrument there are two USB interfaces, the left one is
used for connecting the USB device to export data (for user) and the right one is debug
interface (for the engineer to debug the instrument).
2.1 Electronic:
Power Requirements:
In put: 100 - 240V AC, 50-60Hz. All power cords must be approved for the country of
use.
Out put: 12V, 3A
PC Connection: USB Port
Speed: Reads the cassette in approximately 7 seconds
Cassette Transport: Stepper motor
USB port: USB cable provided
2.2 Physical
Enclosure: Plastic enclosure
Dimensions: 21x21.3x15cm
Weight: 2.5kg
2.3 Environmental
Operating Temperature: 15 to 35° C
Humidity: Between 10% and 85% non-condensing
Storage Temperature: 10 to 50° C
Altitude: 2000m maximum
Part 2: Technical Specifications
3
Advertisement
