Table of Contents
Advertisement
This screen is used to adjust the display and audio parameters. Click Management > Video/
Audio. The screen shown below appears.
1. Move the Brightness slider: values range between -128 and 127
2. Move the Contrast slider: values range between 0 and 255
3. Move the Saturation slider: values range between 0 and 255
4. Move the Audio Channel Volume (left) slider: values range between 0 and 100
5. Move the Audio Channel Volume (right) slider: values range between 0 and 100
6. If any changes were made to this screen, do the following:
•
To enable the changes, click Apply
•
To save the changes, click the Administration menu > click Save Configuration >
click Save.
16
ViewSonic ND4210w
Advertisement
Table of Contents
